The angle from true (gravitational) vertical. In degrees, valid values are 0 to 180. In degrees, down is 0, horizontal is 90, and up is 180.

other_spatial_object (O, K, I: other_spatial_object(property))

Each pty_inclination_from_vertical may be a property of one other_spatial_object. Inherited from property.


wellbore_interval (O, K: wellbore_interval(pty_inclination_from_vertical))

Each pty_inclination_from_vertical may be a property of one wellbore_interval.


wellbore_aligned_point (O, K: wellbore_aligned_point(pty_inclination_from_vertical))

Each pty_inclination_from_vertical may be a property of one wellbore_aligned_point.


general_surface_line (O, K: general_surface_line(pty_inclination_from_vertical))

Each pty_inclination_from_vertical may be a property of one general_surface_line.


general_earth_surface_point (O, K: general_earth_surface_point(pty_inclination_from_vertical))

Each pty_inclination_from_vertical may be a property of one general_earth_surface_point.


general_surface_area (O, K: general_surface_area(pty_inclination_from_vertical))

Each pty_inclination_from_vertical may be a property of one general_surface_area.


earth_position_face (O, K: earth_position_face(pty_inclination_from_vertical))

Each pty_inclination_from_vertical may be a property of one earth_position_face.


activity (O, K, I: activity(process_data))

Defines the activity which created this instance. Each pty_inclination_from_vertical may be the result of one activity. Inherited from process_data.


borehole_trajectory_section (O, K: borehole_trajectory_section(pty_inclination_from_vertical)) (0621)

This is the section of a borehole that this inclination describes. Each pty_inclination_from_vertical may be a property of one borehole_trajectory_section.


data_value (M: ndt_plane_angle)

The measured angle.


preferred_flag (O, I: ndt_boolean) (1047)

The flag is set to True if this instance of property is the preferred value in this data store of this type of property for the object which this property describes. Inherited from property.


data_collection (I, V: SET[0:?] data_collection(collection_content))

Indicates the data collections that include this instance of E and P data. Each pty_inclination_from_vertical may be a member of one or more data_collection. Inherited from e_and_p_data.


graphical_element (I, V: SET[0:?] graphical_element(depicted_object))

Specifies one or more graphical elements which are depicting this data item. Each pty_inclination_from_vertical may be depicted by one or more graphical_element. Inherited from e_and_p_data.


process_data_item (I, V: SET[0:?] process_data_item(process_data))

Defines where this data was used by an activity. Each pty_inclination_from_vertical may be the value for one or more process_data_item. Inherited from process_data.

Local rules:

Non-Abstract supertype:
Each PTY_INCLINATION_FROM_VERTICAL may be instantiated as one of its subtypes. These subtypes are: pty_dip_angle
Uniqueness Constraint (0621)
other_spatial_object, wellbore_interval, wellbore_aligned_point, general_surface_line, general_earth_surface_point, general_surface_area, earth_position_face, activity, borehole_trajectory_section
[I: property] Mandatory Relationship Set
Each PROPERTY must "be a property of" one object.
Supertype path(s):
process_data > property > pty_inclination_from_vertical.
e_and_p_data > property > pty_inclination_from_vertical.

Entity projects as table P_INC_FROM_VERT.